AllesFürGarden.com - Garten online shop günstig kaufen. Kostenlose Lieferung. Zahlung nach Zustellung.

9/9

3 X Motorlift 4330E, 4332E, 4333E, 4335E kompatibel handsender, ersatz sender, 433.92Mhz rolling code. 3 Stücke Top Qualität ersatzgeräten!!!

B01MXW1995
Sparen Sie
17%
Zum Vergrößern auf das Bild schweben
Auf Lager
27.20
22.50
KOSTENLOSER VERSAND!
Dieser Preis ist nur heute!
Sie sparen: 4.70 (17%)
Nachdem Sie eine Bestellung aufgegeben haben, führen wir eine endgültige Bestandsprüfung durch und versenden diese dann. Wir müssen wissen, was zu tun ist, wenn das Produkt zum Zeitpunkt Ihrer Bestellung nicht vorrätig ist.
+
Expressversand (1-2 Tage)
Zahlung nach Zustellung
unsere Vorteile

HerstellergarantieDie Garantie für alle Produkte in unserem Geschäft beträgt 12 Monate

E-Mail BenachrichtigungSie erhalten E-Mail Nachrichten über den Lieferstatus Ihrer Bestellung.

Rückgabe und Austausch - kein ProblemSie können die gekauften Artikel innerhalb von 14 Tagen zurückgeben. Die Ware muss in normalem Zustand sein und alle Fabrikverpackungen haben.

Verschiedene ZahlungsmethodenBezahlen Sie die Bestellung auf bequeme Weise: Bargeld an den Kurier, per Banküberweisung auf den Empfang der Bank oder per Kreditkarte zum Zeitpunkt der Bestellung.

BestpreisWir sind stolz auf unsere Preise, Hunderte von Kunden überprüfen sie jeden Tag, die eine Wahl zu unserem Online-Shop geben!

Produktbeschreibung

These are 3 pieces of high quality 433.92Mhz rolling code Motorlift compatible remote control replacements, that replaces your Motorlift 4330E, 4332E, 4333E, 4335E remote controls. Parameters: 433.92Mhz rolling code frequency; battery and keychain included; High quality remote replacement!! Compatible with following CHAMBERLAIN LIFTMASTER MOTORLIFT REMOTE CONTROLS: 4330E (4330EML, G4330E, G4330) - 4332E (4332EML, G4332E, G4332) - 4333E (4333EML, G4333E, G4333) - 4335E (4335EML, HE4331, G4335E, G4335). HOW TO PROGRAM YOUR REMOTE: Program to Gate / Garage Door Openers the same way as original Chamberlain Liftmaster remotes, please refer to your receivers user manual. For a typical Chamberlain 8002E Receiver, the programming procedure is as follows : 1. Press and hold the remote control push button. 2. Press and release the Learn button in the Control Center on the opener panel. The indicator light will flash once. 3. Release the remote push button. Now the opener will operate when the remote control push button is pressed. Note: If you release the remote control push button before the indicator lights flash, the opener will not accept the code. To erase all codes from the receiver, hold the receiver's Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased. PROGRAMMING VIDEO -->https://www.youtube.com/watch?v=FwsVMJUYThU. If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.amazon.de/dp/B01MTOYB0F. IF YOU HAVE ANY QUESTIONS ABOUT YOUR PURCHASE PLEASE CONTACT US!
Similar products